Vertex™ MultiCure
Multi-tasking curing unit for acrylic use. Hot-curing acrylics, 4 flasks, 100 °C; Cold-curing acrylics, 3 flasks, 55°C, 2.5 Bar,Orthodontic acrylics, 9 models, 55°C, 2.5 Bar; Crown & Bridge acrylics, (minimum) 93°C, 6.0 Bar

Vertex™ Rapid Simplified – Heat Curing Material
Heat curing denture base material based on methyl methacrylate (polymer/monomer) for the mould-compression technique, indicated for full & partial dentures. Cadmium-free, can be polymerized in 20 minutes. Available shades of Veined (10), Pink (3), Pink Veined (8) & Clear (4). Originally from Netherland

Vertex™ Implacryl – High Impact Material
Extra strong denture base material indicated for full & partial dentures as well as dentures fitted on implant. Cadmium-free, can be polymerized in 120 minutes. Available shade of Veined. Originally from Netherland

Vertex™ Self Curing – Cold Curing Repair Material
Cold curing acrylic denture repairing material. Cadmium-free, can be polymerized in 10 minutes by application of pressure and heat. Available shades of Veined (10), Pink (3), Pink Veined (8) & Clear (4). Originally from Netherland.

Vertex™ Trayplast – Special Tray Material
Cold curing acrylic resin for custom-built impression trays. The resin can be prepared quickly and does not stick. The powder is coloured with cadmium free pigments. Available shade of Yellow. Originally from Netherland

Vertex™ Orthoplast – Orthodontic Acrylic Resin
lSelf polymerising acrylic resin for the production of orthodontic appliances. It is suitable for the spray-on technique. The powder is coloured with cadmium free pigments. Available liquid shade of pink & clear. Originally from Netherland.

Vertex™ Divosep Blue – Cold Mold Seal
Alginated based separation solution. Divosep blue is suitable for both packing/pressing technique and cast moulding. The high quality of the raw materials guarantees optimum separation with both techniques. Originally from Netherland

Vertex™ SoftSil 25 Veined – Soft Lining Material
Self-polymerising silicone lining material for chair-side and laboratory use. It is a flexible lining material on a vinylpolysiloxane base & is applied to the jaw side of dental prostheses that are made of hard plastic on a polymethyl methacrylate base.

Vertex™ Pro Clean – Denture Cleaning Agent
Vertex™ Pro-clean is a denture cleaner which is specially developed for Vertex made dentures. It solves and removes bacterial moisture. It gives you a fresh breath. Laboratories use Pro-clean before sending the denture to the dentist or, patient

Vertex™ Base Plate
For the production of temporary base plates. Thickness 1.3 mm (upper and lower)

Cavex Modeling Wax
Pink modelling wax for prosthetic dentistry, composition based on a perfect combination of paraffin, microwax and bee's wax, no distortion of the wax, due to small range (<5%) of melting points, ideal for partial prosthesis, no runniness or droplet formation, one sheet is enough for two prothesis. Available in Regular & Hard type.

Dentaurum Grid Strengtheners, Stainless Steel
CrNi stainless steel (DIN 1.4301), the numerous round perforations (2.5 mm) provide excellent resin bond to ensure a strong, stabilized denture base. Thickness: 0,4 mm

Dentaurum Grid Strengtheners, Goldplated
CrNi stainless steel (DIN 1.4301), the numerous round perforations (2.5 mm) provide excellent resin bond to ensure a strong, stabilized denture base. Thickness: 0,4 mm. Gold-plated.

Dentaurum Lingual Bar
Anatomically shaped e.g. for occlusion plates. Stainless Steel DIN 1.4301. Length: 6cm, 7cm, 8cm.

Dentaurum Strengthener Twisted Wire
Twisted and rolled flat. CrNi stainless steel wire (DIN 1.4404).

Dentaurum Remanium® Laboratory Coils
Stainless Steel DIN 1.4301. Strength category: spring hard * · 1800 to under 2000 N/mm². ø: 0.4mm, 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm, 1.0mm

Dentaurum Wire Mesh, SS
CrNi stainless steel (DIN 1.4301). Wire mesh: 10 x 10 cm. Stainless steel, fine

Dentaurum Wire Mesh, Gold Plated
CrNi stainless steel (DIN 1.4301). Wire mesh: 10 x 10 cm. Stainless steel, gold plated, coarse

Dentaurum Tin Foil
Pure tin 99.9% Sn. In coils

Dentaurum Remanium® Ball Retainer Clasp
Strength category: hard * · 1400 to under 1600 N/mm², ø: 0.7mm, 0.8mm, 0.9mm, 1.0mm, Length: 38mm

Dentaurum Emery Cloth
Laboratory sand paper. Width: 15mm. Grain size: 120

Dentaurum Rapidur® Synthetic Plaster
White, superhard, smooth. Class IV. Application for CoCr casting, precious metal work, acrylics, ceramic, orthodontics.

Newstetic Alfa Lux Acrylic Teeth
The wide variety of  two color layer shades allow a more exact selection of the tooth tones required for restoration.Their high abrasion resistance and chromatic stability make them ideal two layered teeth. Available shades are 03, 62, 65 & 59.